gameXbox

How To Connect Xbox 360 Controller To PC | InspiraGame

If you want to learn how to connect Xbox 360 controllers to PC, this article will provide you with the information you need.

When buying an Xbox, there are two types available in the market: one is the wireless controller, which is used for wireless gaming.

feature image: Photo by Louis-Philippe Poitras on Unsplash 

You can also use the wired controller. Both of them can be used without any problem. When connecting Xbox controller to PC, there are some things you should do first. It is better to read the instructions carefully before setting off to connect your controller.

Connecting Xbox 360 Controller to PC

Step 1: Hold up your xbox 360 controller in front of your mouth and plug the cable into your USB port.

Step 2: Windows 10 automatically will install drivers for Xbox 360 from your system. If you get a message that the drivers are not found, you have to uninstall and reinstall them.

Step 3: After doing so, open Device Manager by clicking Start > All Programs > Accessories. In the result, open Xbox 360 Drivers. Check the device to see if it is recognized properly. If not, search for the manufacturers’ website and download updated drivers.

Step 4: Now, you are ready to connect your xbox one controller to your system. The first step is to insert the wireless adapter into your computer. Follow the prompts. It is important to note that this step is performed to verify if the wireless adapter is working properly. If it is not connected, you should try the following steps. They will help you in determining if you need to replace or repair your wireless adapter.

Step 5: Most likely, your router must also be configured to work with Xbox 360 controllers. If not, you will have to go to your router’s website and follow the instructions for configuring the device. Usually, this process requires the use of the router’s web-based interface.

Step 6: If you are using a wired xbox 360 controller, it is now time to find a compatible cord. You can use your original power adapter for your console or use the wireless adapter. You can plug the cord into an appropriate location on your router. If your router has an optical input, make sure that it can be seen. If not, it will be necessary to install an optical input.

read also: 

  1. How to Easily factory reset xbox 360 | InspiraXBox
  2. How to Connect Bluetooth Headphones to Xbox One in 3 Simple Steps
  3. How to Take Apart Xbox One Controller – DIY with Torx Screwdrivers
connect xbox 360 to pc
connect xbox 360 to pc – Photo by Jakub Sisulak on Unsplash

Controller With Windows OS

Most controllers for xbox can also be used with Windows Vista or newest windows, so you don’t have to worry about installing the drivers.

However, the only thing that you need to do is to “install the USB driver into your computer first or windows 10 automatically install driver for your controller” . Once it is already installed in your machine, you can easily plug the controller into your computer using the USB cable.

Once you have successfully installed the controller, you will then be able to complete the installation process.

Option 1: Using USB

  • XBox Series X|S, Xbox Elite Wireless Controller Series 2, Xbox Adaptive Controller –> Connecting Controller Using USB-C Cable
  • If your windows can’t connect wireless after (sleep mode) –> Press Xbox Button or Unplug the device and then plug it back in.

Option 2: Using Xbox Wireless

  • Plug Xbox Wireless adapter to your PC / notebook.
  • Turn on controller by pressing Xbox Button (Xbox button continue flashing)
  • Press and hold pair button on Xbox wireless adapter.
  • Press and hold the Pair button on the top of the controller – the raised button. The Xbox button on the controller will flash more rapidly  – this means your controller is searching for the Xbox Wireless Adapter. When connected, the Xbox button on the controller will stay lit.

Additional: Install Xbox With Bluetooth

Once the wireless xbox 360 controller has been installed, you can now connect the wireless adapter to the computer.

After you have done this, you can see the wireless controller icon on the system tray. Next, you will have to install the Bluetooth drivers.

For this, you can go to the software section and select Driver under Drivers tab. Once you have done this, you will be able to pair the wireless xbox 360 controllers with your pda or laptop.

Pairing an Xbox Wireless Controller to your PC via Bluetooth:

  1. Turn on your Xbox Wireless Controller by pressing the Xbox button.
  2. Press and hold the Pair button on your controller for three seconds (the Xbox button will start flashing rapidly).

read also: How to Easily factory reset xbox 360 | InspiraXBox

Additional: Install Wireless Controll Driver

The last step in how to connect XBox 360 controller to PC is to install the wireless controller driver. Again, it is usually very easy to install it.

Simply follow the steps outlined in your manufacturer’s manual. There’s really nothing difficult about this procedure, and you can see results within minutes.

P/S: Connect Controller Using The Proper Ports

How to connect Xbox 360 wireless controller to pc should not be complicated at all. Just like any other peripherals, you have to follow the correct instructions to ensure that you get the best experience.

The most important thing to remember is to connect the xbox 360 wireless controller to your computer using the proper ports.

How It Connect Each Other – Connect Xbox PC

The Xbox 360 wireless controller connects with the use of IR LEDs. This is done by the controller transmitting IR pulses from one end to the receiver.

This transfers the data from the transmitter to the receiver. It is important to note that there is a protocol that must be followed in order to correctly send the pulse and receive the result.

Once you are able to follow this protocol, the Xbox 360 will recognize the pulses and respond accordingly.

Installing Nesessary Drivers

Once the Xbox 360 wireless xbox controller is successfully connected to the computer, you must install the necessary drivers.

For this, you will need to go to the device manager and select add/remove device. Once you have done so, the next step is to find the Xbox 360 wireless adapter.

You will need to click on it and then move the mouse cursor inside the device manager window. The device driver should be listed at the bottom of the window.

Ashley Elf

Tea & Coffee - Art with Design - Home Decor Freelancer & Wordpress - Free as Always -

Related Articles

Leave a Reply

Your email address will not be published. Required fields are marked *

Back to top button